Italian sportbike and streetbike parts and accessory specialist CNC Racing has a range of parts available for the Panigale V2 and V4, including these two versions (plus exclusive Pramac Racing Limited Edition) of V4 footrests.
 |
| V4 rearsets |
Severe duty track tested, they are up to 12 position multi-adjustable and fully machined from solid lightweight alloy and designed for use with road or inverted gear levers without any modification. The footrests themselves, and the extremities of the levers, can be reclined and locked by means of elastic steel pins and the gear and brake levers are mounted on very smooth bearings.
The footrests are knurled to ensure maximum grip even in very wet conditions, with the hole for the workshop motorcycle stand and the hydrostop included in the kit. A second, less extreme "Easy" kit is also offered.
 |
| GP winglets |
Available in versions for V2 and V4 Panigale models (and the Aprilia RSV4), these aerodynamic autoclave made carbon fibre GP winglets are said to create greater aerodynamic downforce on the front axle, equal to about 25 kg at the maximum air pressure, increasing the stability of the bike and guaranteeing great driving precision.
Also seen here, these 53 mm clip-ons for the V4 are machined from solid 7075 zinc alloy aluminium (Ergal - for good ductility, high strength, toughness and good resistance to fatigue and corrosion) and then anodised. They are equipped with lightened stainless steel screws and front holes for fixing a front brake fluid tank bracket.
 |
| 53 mm clip-ons |
A 51 mm steering damper support is included in the kit - this allows the angular adjustment of the handlebars without modifying the anchor point of the stem. The handlebar inclination is 6.5 degrees, and they are 225 mm long with 30 mm collar height.
CNC Racing frame crash protectors for the V4 Panigale are model-specific designs to preserve the engine, chassis and fairing from damage in the event of a drop, slide or side crash. They are made in aluminium and Delrin and no modifications are required for mounting.
 |
| Frame crash protectors |
 |
| Left-side handlebar switches |
Finally, these left-side handlebar switches for Panigale V4 street models are machined from 7075 aluminium bars (Ergal) and then hard black anodised. All the buttons are compliant with the IP67 water resistance standard and CNC Racing says the operation of all the buttons is guaranteed to cover 700,000 cycles. They are a fully reversible plug & play install - just dismantle the original switch with the tools recommended by the manufacturer, then fit the CNC Racing switch, connecting the plug to the original cable. They are also available as a Pramac Racing Limited Edition in black.
CNC RACING
www.cncracing.it
