POLINI has expanded its product range with the introduction of a new carb and a range of oil filters.
The company says that its new CP Evolution carburettor has been shown to achieve best performance between 12,000 and 15,000rpm. This performance is due to the CNC machining of the intake to allow high levels of air flow. This is then combined with a manifold mount that has a 28.5mm diameter to allow the fitting of a free flowing manifold to exploit the carb’s performance. The carb is also supplied with a flange to adapt the Polini Evolution filter with its bigger diameter.
Additional performance measures on the CP Evolution include a very short inlet pipe with an exclusive concentric design and a geometry optimised for air. The float level, which is completely made of plastic, and the needle seal are carefully quality- controlled during production to ensure the same standard of efficiency over time, and the overflow of petrol in the atomiser has been checked to ensure the correct flow dynamic at every position of the throttle valve when open.
Polini’s ‘Original’ oil filters are available for four-stroke engines and feature a micro- porosity filter structure to purify the oil by holding any micro metal particles or sludge present in the lubricant.
POLINI MOTORI SPA
Alzano Lombardo (BG), ITALY
Tel: +39 035 2275 111
news@polini.com
www.polini.com
