Monday 23 December 2019

Comment by Editor, Robin Bradley

Third Quarter +6.8% - now the clouds are retreating!

This has been a roller coaster year where new Internal Combustion Engine (ICE) registration data is concerned.
After a storming first quarter for most of the (currently!) 28 EU markets, growth was +19% over Q1 2018 on 242,696 units (204,163 units for Q1 2018).
For the first six months of 2019 the ACEM data cited growth of +8.67% on 612,690 units YTD (563,820 units for the first half of 2018).
However, the growth for the second quarter alone, the period April, May and June of this year, was down to +2.9% on 369,994 units for the second quarter of 2019 (compared to 359,657 units for Q2 of 2018).
This appeared to throw the early forecasts of an annual 2019 growth rate of between 7 and 9% into considerable doubt. Indeed, if the down trend were to have continued, then it appeared quite likely, statistically, that the second half of 2019 would have been negative, or flat at best, and that somewhere around +2% (+/- 2%) was starting to appear to be the more likely outcome. I was suggesting that +3% for the full year was starting to look more realistic.



However, drilling down into the ACEM data for the first nine months of the year shows good news. The ACEM data puts the first nine months at +8.1% over the year-ago period with 903,586 new Internal Combustion Engine motorcycles registered.
Within that figure, Q3 was a reassuringly stronger +6.8% at 290,896 units (compared to 272,355 for Q3 of 2018). Hurrah!
The data came out while much of the industry was gathered in Milan for the 77th EICMA. It is uncertain as to whether or not adverse registration statistics would have dampened the market 'vibe' at EICMA, or if positive data ever actually adds to the atmosphere at a show.
Generally, by the time a show is underway, the decisions about market prospects (good or bad) have already been taken by most vendors, and unless we are in the kind of major economic downturn seen a decade ago, attendance numbers generally aren't affected by such factors anyway.
EICMA is claiming a total attendance "reaching almost 800,000". Whether or not that is true (doubtful), it doesn't really matter - there were plenty of people there either way. I checked out of the show on the Thursday evening, but a friend with a booth adjacent to Indian Motorcycle emailed me Friday evening to say the place was "rocking" (and in a good way!).
Good news is good news, and regardless of the truth behind the numbers and the effects that the growth of the past five years (especially in Italy) has on short-term attitudes, the overwhelmingly positive market sentiment in evidence among the vendor community at EICMA, and the crowded aisles of at least seven of the eight halls in use, showed that we are bathing in the warm glow of sunlit uplands at last - and long may it continue!
It won't of course, it never does. This was the 30th anniversary of my first visit to EICMA - back in the days when it was an alternate annual event staged in Mussolini's 1930s then state-of-the-art downtown 'Trade Fair' complex - the one where fascist brutalism meets deco loveliness. For the widest ranges of reasons, all business is a cycle and all businesses are subject to cyclical trends and impacts. For now, though, let's make sure that we enjoy the moment, but not get complacent - not take our eye off continued and continuous preparation for the future.
At present that preparation has been going well, but, if it is in large part R&D investments that got us to this point after the calamitous events of ten years ago, then now is not the time to take our eye off that ball.
Rather with investment "proof of concept" fuelling growth, we need to re-double our efforts to not just keep the momentum going, but to accelerate it.
R&D spending isn't "just for Christmas" - it needs to be a 24/7/365 obsession that evolves over decades - a process that is never finished; it does not have an end-game, but by its nature it should result in designs and technologies that make prior triumphs redundant. It does not have a finish-point but is simply a time, a point, on a virtuous upward spiral of market improvement. Turn off the switch and the power will drain from all that has so far been achieved.
My overwhelming impression of the show, reinforced by the workload we have had to eat through since getting home, was of a show packed with more excellent new products and vendors for us to write about than ever before.
More to get the doors of the market's dealerships swinging than ever before, more to get consumers excited than ever before. In a performance-oriented market, the performance of the market is highly motivating.
Personally, I think we have a lot to thank the changing demographics of our market for. They have provided the R&D stimulus that has set us down a much longer and more important path to, first, being able to come to understand what the bigger picture issues beyond the downturn really were going to be, and get them firmly in our sights.
With issues come opportunities, and though often regarded as a cynic, I still like to think that the bigger the challenge, the bigger the opportunity.
That big picture, that big opportunity is to continue accelerating the progress that regulators and manufacturers (at last working in harmony) are making in getting our industry fit for purpose in an urban mobility and leisure riding future that speaks 'new gen' where customers are concerned.

Putoline

Putoline supporting Mirjam Pol and Bas Dakar KTM racing team

Putoline Oil will be the official lubricant partner of Mirjam Pol and the Bas Dakar KTM racing team during the Dakar Rally 2020. This year's 42nd edition of the legendary rally is being held in Saudi Arabia for the first time, starting in Jeddah January 5th.



Mirjam Pol will start the twelve-day stage tour on the brand-new Husqvarna FR 450 Rally and the Bas Dakar KTM racing team on their KTMs. Mirjam was the women's Dakar winner in 2009 and is still the only Dutch participant: “For the third year in a row, I am taking on the challenge of the toughest rally in the world together with Putoline Oil.
"Putoline supplies a complete line of high-quality oils, and thanks to their constant research and innovative policy, I don't have to worry about the lubrication of my bike," said Mirjam.
The Bas Dakar KTM racing team will start off the rally with nine (!) bikes: "We are delighted with the renewed collaboration with Putoline Oil. With the great finish rate and results in 2019, the Bas Dakar KTM racing team is happy to be able to rely on the superior quality of Putoline Oil products. We really enjoy working with Putoline, and their products fit in perfectly with our wishes,” said Bart van der Velden, team manager of the Bas Dakar KTM racing team.
“During Dakar last year we made use of the ergonomic and handy Bag-in-Box packaging for the first time. The ease of pouring and the compact volume of waste material are of great value to us during Dakar.”
For Putoline, Simon Kamper told International Dealer News: "Under the slogan 'Never change a winning team', we are proud of the fact that we can continue all these collaborations and have prepared them very well. All the teams riding with our products will be doing so with the backing of our revolutionary new N-TECH technology - a technology that has already proven its effectiveness and reliability in various competitions at world level."

Stat Attack


Japan Exports
Japanese made 'Big Four' brand motorcycle exports (250 cc+) to Europe were up in September 2019 by +30.85% (11,790 units) - the first increase this year. For the YTD exports are -19.94% at 114,717 units. Total PTW exports to Europe were -20.66% YTD at 125,352. Total worldwide PTW exports from Japan were -16.27% at 278,954 units.

Poland
New motorcycle registrations in Poland were +33.48% (17,745 units) for the year to October - the best first ten months since 2016. Total new PTW registrations in Poland to October were +24.67% at 35,656 units. Added to the used units getting a first registration in Poland (an important additional part of the market there), total new and pre-owned motorcycle registrations YTD were +11.01% at 78,055 units combined. Total new and pre-owned PTW registrations, including motorcycles, were +11.38% YTD at 104,738 units. By this metric, Poland is Europe's 5th largest market YTD 2019.

Austria
Total new motorcycle registrations through September 2019 were +1.92% in Austria at 13,309 units. Total new PTW registrations were +8.87% at 38,140 units, thanks to a robust moped and scooter market, with Vespa the market leader (6,359 units). Motorcycle market share leader was KTM at 24.31% share (3,236 units YTD), followed by BMW (12.84% share), Honda (11.15%), Yamaha (10.63%) and Kawasaki in fifth at 7.05% share.

Sweden
For the ten months of 2019, new motorcycle registrations were +2.48% at 11,351 units. Total PTW sales were -7.47% at 24,160 units due to further decline in moped sales (-14.81% YTD, 12,809 units).

Switzerland
New motorcycle registrations through October were -1.06% at 23,334 units. In total PTW terms, the Swiss market was -4.03% at 39,482 units. Motorcycle market share leader is Yamaha with 3,926 units sold, ahead of BMW (3,485 units). Honda is third, followed by Kawasaki and Harley-Davidson. Top seller is the Yamaha MT-07 (1,084 units), with BMW R 1250 GS (922) second, Kawasaki Z900 third (575), the Z650 fourth (506), with the BMW R 1250 GS Adventure fifth (474 units sold).

ZTechnik

ZTechnik engine guards for R1250 series

Maywood, Illinois based ZTechnik's engine guards are now available for 2019-20 BMW R1250 series models in both the original electropolished stainless steel finish and a new E-Coated/powder-coated black steel finish.



The E-Coat (Electrophoretic Coating) is applied inside and out to eliminate rust and corrosion, and the black powder-coating makes the finish tough and long lasting.
ZTechnik engine guards attach to the engine mounts – not the engine covers – to protect the motor's heads/valve covers. Integrated top brackets on each guard allow the rider to mount accessory lights, video cameras, or whatever they can imagine.
These engine guards are "carefully designed to allow clearance for oil changes or valve cover access, so they don't need to be removed for routine maintenance. For greater comfort on longer rides, mount 1-inch clamp-on footpegs to the engine guard's upper or forward sections. All mounting hardware is included, along with easy-to-follow installation instructions".

ZTECHNIC by NATIONAL CYCLE INC.

www.ztechnik.com

News Briefs




Norton Motorcycles' founder Stuart Garner has appointed "prominent law firm and corporate adviser Fieldfisher to sound out potential investors". It is said that Garner is looking for GBP £5m to buy parts to fulfil a £26m order book. Previously Norton has relied on Garner’s own financial resources. BDN reports that the company’s most recent annual accounts to March 2018 show a 20% revenue increase to £6.7m, turning a loss of £201,842 in the preceding year into a £33,701 pre-tax profit.

Moto Guzzi says that their 2019 Mandello factory 'Open House' drew 30,000 visitors from all over Europe over three days in September. "The three days were filled with love for bikes, friendship, music, travel, adventure and lots of test rides". Over 20,000 'Guzzisti' were there on the Saturday, a record, to see the arrival of the "Road to Mandello" convoy, "consisting of more than two hundred riders who had left from Milan to reach the legendary red gates on Via Parodi, the symbol of Moto Guzzi".

 


The popular Moto Bike Expo (MBE) takes place again in Italy from January 16th - 19th. This will be the 11th year it has been staged at Verona following its acrimonious split from Padua. A combination custom and 'mainstream' show, MBE has the backing of most of the major OEs, including Honda, Yamaha, Kawasaki, Suzuki, Ducati, BMW, Triumph, Royal Enfield, H-D and Indian Motorcycle.

BMW is applying for a patent on technology that will lock the bike’s transmission to make it impossible for a thief to wheel the bike away - technology that "will be far more robust and hard to defeat than its current equivalent, the steering lock".

 


MIPS, the Swedish brain safety technology company that has been leading the way in helmet and brain safety with over 20 years of research, has announced that founders Peter Halldin, Hans von Holst and Svein Kleiven have been awarded the 2019 Swedish Engineers Polhem Prize. The MIPS-patented Brain Protection System (BPS) is designed to reduce rotational motion transferred to the brain from angled impacts to the head.

 


Honda is celebrating the 40th anniversary of manufacturing in America at Marysville, OH., where production of the Elsinore CR 250 motorcycle started in 1979 with a staff of 64. Honda was the first Japanese automaker to build products in the U.S., and automobile production followed in November 1982. Honda now has five U.S. auto plants, and in 2018 with 12 major plants in the U.S. in total employing some 25,000 people and representing an investment of over $11 billion in Ohio and over $21 billion in the U.S.A. in total.

Hevik

'Stelvio' touring jacket

Part of Hevik's Adventure range, the Italian brand introduced the 'Stelvio' touring jacket at EICMA.
It is offered in men's and women's styles and its technical features are said to make it suitable for all weather conditions while providing a constant high level of comfort. Even though it comes with a fixed waterproof membrane tested to a 4,000 mm water column, 'Stelvio' is guaranteed to perform similarly to a classic three-layer jacket. The ventilation system consists of four air vents featuring zip closures - two on the chest and two on the back. It has a soft, removable polyester thermal lining and the outer fabric, 93% 600D polyester and 7% nylon, is coated on the inside.
Standard CE protectors are located inside at the shoulders and elbows, as well as a rear pocket for a back guard. 'Stelvio' has two spacious outer hip pockets, waterproof and covered with flaps, and a handy Napoleon pocket on the inside. The fit of the jacket can be tailored by adjusting the buttons on the sleeves and the straps on the cuffs, as well as with a waist belt.
The jacket is certified to harmonised standard Fpr EN 17092, the size range for the men's models goes up to XXXXL, and the colour schemes are black, ice/anthracite and black/fluorescent yellow. Other features include a Neoprene collar with two-button fastening and reflective inserts on the shoulders.

HEVIK
www.hevik.com

Andreani Group

DB4 Plus advanced suspension tuning dyno

The DB4 Plus is the "newest and most advanced" suspension testing dyno from Italian specialist Andreani Group.

Available for use on motorcycles, scooters, mountain bikes, cars and ATVs, "this is the enhanced version of the DB4 base model that had already set the pace for its advanced technical features and has become established as the best suspension dyno on the market".
Due to the 5.5 kW 380V three-phase AC motor it can reach higher speeds and forces than the base model (which has a still excellent 4 kW engine), allowing specialised technicians to calibrate and tune the highest possible suspension forces and highest speed suspensions.
Among its advanced functions the DB4 Plus features software that includes hysteresis analysis and dissipated energy and damping coefficient calculations, and it is equipped with a sophisticated electronic controller board that ensures stable and reliable automation and extremely precise data acquisition.
It also offers real-time visualisation of the suspension load-speed graph with an intuitive graphical interface, the possibility to compare different click settings and valve options, to measure dynamic suspension parameters and to detect any operating anomalies. Custom software also available upon request. Like the DB4, the Plus model is equipped with a series of adapters to test every kind of suspension and it is delivered with its laptop with software already installed.

ANDREANI GROUP INTERNATIONAL

www.andreanigroup.com

SC-Project

Euro 4 SC1-M double muffler for middleweights

Best known for its track and high-performance exhaust expertise, recent new products from Milan area based Italian exhaust specialist SC-Project have included Euro 4 slip-ons for the Z900RS and Dakar inspired 'Rally Raid' ADV slip-ons for the KTM 790 Adventure. 


Developed by the SC-Project R&D department for extreme off-road use, the 'Rally Raid' is fully made in titanium, right down to the muffler downpipe socket and robust, highly resistant fixing clamp, resulting in the highest possible strength, lowest possible weight and best possible performance improvements.
Seen here is an evolution of the popular, multi-championship winning SC1-R silencer. The SC1-M is a Euro 4 compliant system specifically calibrated for use with mid-range, medium displacement motorcycles ('middleweights') like the Ducati Hypermotard 950, Triumph Speed Triple 1050 and Aprilia Dorsoduro 900 in a double-muffler configuration, with a single side muffler version also available for the new BMW S 1000 RR and Kawasaki Ninja 400.
The body of the muffler is made in high-grade, high-strength, lightweight titanium in a natural   titanium finish, with a carbon end cap. Equipped with dB killer and mounting system in lightweight, high-strength titanium, SC1-M mufflers are also available in full carbon versions.

SC-PROJECT
www.sc-project.com

Thursday 19 December 2019

ACEM

New Euro 5 environmental standard for motorcycles and mopeds to enter into force January 1st 2020

An important news release from ACEM, the Brussels based international motorcycle industry trade association…
As of 1 January 2020, all new type-approved motorcycles and mopeds sold in the European Union (EU) and the European Free Trade Area (EFTA) will have to meet the new Euro 5 environmental standard replacing the current Euro 4 specification.
For existing moped and motorcycle models type-approved before the 1 January 2020, Euro 5 will become mandatory as of the first day of 2021. This brings the pollutant emissions of L-category vehicles (i.e. mopeds, motorcycles, tricycles and quadricycles) to the same level as Euro 6 cars.


Improving environmental performance through vehicle technology
Technical innovation in the motorcycle industry has played a key role in progressively lowering vehicle emissions. Since the introduction of the Euro 1 standard for motorcycles and mopeds in 1999, pollutant emissions have been drastically reduced. Combined emissions of hydrocarbons (HC) and nitrogen oxides (NOx) have gone down by 96.6%, whilst carbon monoxide (CO) emissions have been reduced by 92.3%.


The Euro 5 environmental standard in detail
Under the new Euro 5 standard, tailpipe emissions of mopeds, motorcycles, tricycles and quadricycles will not be allowed to exceed 1,000 mg/km of carbon monoxide (CO), 100 mg/km total hydrocarbons (THC), 68 mg/km non-methane hydrocarbons (NMHC), 60 mg/km of oxides of nitrogen (NOx) and 4.5 mg/km of particulate matter (PM). These Euro 5 tailpipe pollutant emission limits are the same as those of Euro 6 for cars.
The new Euro 5 standard that will replace the previous one (Euro 4) will become mandatory for all new type-approved motorcycles and mopeds as of 1 January 2020. Some niche segments (i.e. enduro and trial motorcycles, three-wheeled mopeds designed for utility purposes and light quadrimobiles) have been granted additional lead time. These niche products will have to comply with the new Euro 5 tailpipe emission limits as of 1 January 2024.


Antonio Perlot, ACEM Secretary General: "From a supply side perspective, vehicle technology has been instrumental in improving the environmental performance of motorcycles."

Durability provisions and evaporative emission levels are equally becoming more stringent. Another important innovation is the progressive introduction of a second stage on-board diagnostic (OBD), allowing advanced identification and flagging of malfunction and deterioration of emission control systems.
Antonio Perlot, ACEM Secretary General, said: "From a supply side perspective, vehicle technology has been instrumental in improving the environmental performance of motorcycles. ACEM members have invested heavily in research and product development to develop Euro 5 compliant motorcycles equipped with technologies such as 3-way catalysts with oxygen sensor controls, complex electronic engine management systems, advanced fuel injection and variable valve timing and lift technologies."
"As a result of this, the environmental performance of Euro 5 motorcycles will be equivalent to that of Euro 6 cars. ACEM sees this fitting within the vision of the recent European Green Deal of achieving less polluting transport, especially in cities, and further enabling the contribution of our range of vehicles to a multimodal transport system."

German motorcycle market

Germany: motorcycles +4.51% January - October

The latest data from the IVM, the motorcycle industry trade association in Germany, shows motorcycle registrations up by +4.55% (4,968 units), having also been up in September (+5.23%, 6,920 units).



For the year January to October, the German motorcycle market is +4.51% at 108,404 - the best comparable performance since before 2008. In total PTW terms, October was +3.01% (8,044 units) and +7.06% (158,024 units) for the YTD.
The top selling model for the first ten months of 2019 remains the BMW R 1250 GS (9,100 units), way ahead of the Yamaha MT-07 (3,569) in second place and the Kawasaki Z900 in third (3,045), followed by the Z650 in fourth (2,675) and the Honda Africa Twin fifth with 2,303 units sold YTD.
With seven models among the top 30 best-selling motorcycles, it is no surprise that BMW has stretched its German market dominance still further, having sold 23,906 units in total YTD for a commanding 22.05% market share (up +8.63% on the year ago period).
Honda was second with 12,603 units sold for an 11.63% market share; KTM third with 12,467 units (11.50% share); Kawasaki fourth with 12,387 (11.43% share); Yamaha fifth with 11,085 units sold (10.23% share) and Harley-Davidson sixth with 9,826 units sold YTD (9.06% share). They are followed by Suzuki (5,260), Ducati (4,864), Triumph (4,745) and Husqvarna (2,716).
Royal Enfield is up to 11th best-selling brand in Germany with 1,523 units sold YTD for a modest but fast growing 1.40% market share. Indian Motorcycle are also on the warpath with 1,179 units sold YTD for a 1.09% share.
Total motorcycle registrations for the full year 2018 in Germany were +7.35% on 2017 (108,296 units), with total PTW registrations +10.98% (155,184 units).

MC Massan

MC Massan - Gothenburg

In its biennial frequency of moving between the Swedish capital Stockholm and Gothenburg in Southern Sweden, 2020 is a "head west" year for MC Massan, Sweden's annual motorcycle expo.


The show will be open from Friday January 24th to Sunday 26th at the Swedish Exhibition Center, Gothenburg.
The show hosts a broad-based powersports industry footprint with the inclusion of ATV/Quads, snowmobiles and Personal Watercraft (PWCs) in addition to motorcycles, trikes, scooters and mopeds.
The last time the show was at Gothenburg in 2018, it attracted over 50,000 visitors, and with motorcycle registrations growing again in Sweden (+12.12% for the first six months of 2019), after a disappointing 2018 and reports of a good year for Sweden's important MX and off-road market, the organisers will be optimistic of at least the same level of attendance at Gothenburg again next year.
www.mcmassan.se

WRS

WRS - "by riders, for riders"

Founded in 2009 ("by riders, for riders") and based near Pesaro, Italy, WRS has quickly emerged as a 'major player' and as one of the fastest growing manufacturers of acrylic windscreens and special parts in Europe.


Touring smoke windshield for BMW F 750 GS / F 850 GS 2018/2019

Driven in no small part by technical partnerships and sponsorships with major teams such as Pramac Racing (Ducati MotoGP) and Team SIC 58 Squadra Corse (Moto3), and mostly recently (as announced at EICMA) the BMW Motorrad WSBK Official Team, the company has invested heavily in cutting-edge technologies, creating a dedicated design team and a production department with a reputation for precision and quality.
"We combine new technologies for design and development, with the use of certified materials with the best parameters of resistance and transparency," says CEO Nicolas Zavoli. "All our products are designed with the utmost attention to detail and checked one by one to give our clients a product of the highest quality with 100% 'Made in Italy' precision."

Sport dark smoke windshield for Honda Africa Twin CFF 1000 L /ADV
Smoke transparent windshield for KTM 1290 Super Adventure 2017 -2019

The independent production department completes all stages of design and manufacturing using advanced machinery such as laser-cutting, 3D scanners, CNC-machining and simulation software. "Our decades of combined experience and investment in the most modern technologies allows us to achieve high quality standards.
"We are constantly working hard to create innovative products. Physical simulation software allows us to achieve high aerodynamic performance combined with the OE designs our products replace, but with a design harmony that enhances the style of the bike. Testing is extensive, out on the road in year-round real-world riding condition tests as well as in the software. Aerodynamics is about 'feel' as well as maths, and working this way allows us to offer aesthetically unique products with excellent aerodynamic protection and minimum turbulence values".
WRS windshields are made in high quality acrylic (Plexiglas PMMA), which guarantees an excellent "transmittance" (ability to pass the light) and correct optical clarity. "They are safe and on impact can absorb the energy by breaking but not shattering like glass and do not create dangerous splinters. 




"Our designs are so finely tuned that whether a high or a low design, we gain optimum protection from wind and rain, the basis of our designs has a more dynamic line that protects most of the body from the air but leaves the face uncovered. The addition of deflectors can further protect the shoulders and arms".
Among the company's top sellers is a 4.5 mm thick Plexiglas frame kit and windscreen (in smoke) for the 2018/2019 BMW F 750GS, which fits the original BMW sub-frame and is supplied complete, to be compatible without having to make any changes.
Aerodynamically tuned to eliminate the turbulence that hits the rider's helmet, additional protection is offered by the touring fairing for maximum comfort on short and long journeys. "The design, studied in detail, fits perfectly with the line of the bike, giving it an even more appealing look".
www.wrs.it

Polisport

Phantom PRO body chest protector

Portuguese performance plastics specialist Polisport is expanding its range of body protection products with additions to its Phantom family of protectors - the new Phantom PRO "brings the best of the Phantom line, comfort and adaptability to the body shape, with the upgraded homologation to chest protection".

Complying with EN1621-3:2018 (Chest – Type A) and EN1621-2:2014 (Central Back – 1), this protection matches current FIM body protection rules to be usable in all FIM races.
The Phantom PRO is neck brace friendly, slim and adaptable to the body of the rider and has thermoformed shoulder paddings for a perfect fit. "With the high impact-resistant plastic and the soft impact-deflecting padding, Phantom PRO has the perfect blend between comfort and protection".
The Phantom PRO line is available in Polisport's popular and stylish Nardo-Grey colour, in which connection and also seen here, Polisport has expanded its range of popular Nardo-Grey colour make-over kits.


This colour will be available for some Husqvarna, KTM and Beta models and for Polisport restyling kits for Yamaha and Honda 2-stroke models. The kits will come with the fork guards included and "will be the perfect match for your graphics".

POLISPORT
www.polisport.com

Galfer

New 'CUBIQ' brake disc by Galfer

The new CUBIQ disc from Spanish brakes specialist Galfer features an original brake track design with hexagonal shapes that is said to offer better braking than a conventional round disc design with up to 40% weight reduction.


"While searching for innovation and development, our engineers created a new concept in brake discs for high displacement motorcycles," says owner Umberto Milesi.
"The CUBIQ disc design features a unique brake track configuration with hexagonals that resemble the molecular and crystal structure of the steel itself. With this shape we achieve better cooling and improved weight loss, which also results in better manoeuvrability of the motorcycle.
"The new CUBIQ was tested and validated in competition during last June's 3-hour endurance race organised by Monlau Competición at the Calafat circuit - no less than ten Honda CBR 600 RR motorbikes equipped with the new CUBIQ discs and Galfer Sinter Sport R G1375R brake pads rode the circuit simultaneously."
The improved cooling is achieved because the design increases the convection perimeter, so there is more cooling surface around the brake track and better temperature dissipation. "The increased cooling surface optimises the friction surface and enables a lighter brake track design".



Galfer also says that because there is the same contact surface between brake pad and disc in each turn, the brake pads wear evenly and there's homogeneous pressure, and that the reduced unsprung mass reduces the dynamic unbalance (gyroscopic effect) and improves the manoeuvrability of the motorcycle.
The design of the CUBIQ brake track is inspired by the latest modern designs and contemporary elements and is named after the steel molecules of the crystal structure of the metal.
The CUBIQ range will include fixed and floating discs and the floating discs will have variants with a steel or aluminium core.
The CUBIQ was officially released at EICMA for several road and sport motorbikes from 600 cc and up and will arrive on the custom market for Harleys and other custom style V-twins in February 2020.
"Just as the Disc Wave became a new standard in the brake components industry when we released it 20 years ago, so too the CUBIQ will set a new benchmark".

INDUSTRIAS GALFER S.A.
www.galfer.eu

Ognibene

Trofeo oil filters by Ognibene

Noted for its long history (founded in 1948), patented 'Silent' sprockets and gears, and complete off-road transmission kits (with D.I.D chain), Bologna, Italy based Ognibene continues development of its Trofeo brand.



Trofeo by Ognibene ('Trophy') is a Pro-Grade line of products that includes chain drive kits, brake pads (introduced in 2010) and now, launched at EICMA, oil filters.
Available in a GP racing version, and for 'standard' road , Motocross, Enduro, scooter and ATV models, they have been "designed to the finest of details", says Sales Manager Federico Aribizzani, "to guarantee maximum performance and increase the durability and reliability of the engine."

1) Heavy-duty steel canister
2) Pressure relief valve
3) Highest quality filtration media
4) Anti-drain valve
5) Heavy-duty steel base plate
6) Pre-lubricated gasket

"Constructed for the most demanding OE standards and still offering excellent value for money, the new Trofeo oil filters maintain lubricant performance even after thousands of miles thanks to their advanced filtering system.
"Everyone knows that constant and correct cleaning of the oil is of vital importance to engine performance and durability. The oil filter is a critical component - it has to be able to block the component friction and other impurities that are carried by the oil to prevent them getting into the combustion chamber. If there was no filter, the polluted oil would increase the wear and tear of the moving parts, directly resulting in an increased risk of engine damage.


"For this reason, Ognibene Motorcycle, with its 60 years of motorcycle industry experience and the skills acquired over the years, decided to develop its own line of oil filters, broadening its range of products for the motorcycle aftermarket and enlarging the range of Ognibene quality products that dealers can sell and use.



"In addition to our ROAD filters, we have developed a specific line of oil filters to meet the demands of modern racing engines and extreme driving conditions - Trofeo GP 'Racing' oil filters. Developed according to very high specifications, they have a 17 mm hexagonal nut that facilitates quick and easy assembly and disassembly with reduced risk of 'burring', a hole that allows for mandatory safety wire attachment for use in racing, and a special silicone membrane that ensures an excellent seal, even at the very high temperatures generated in race engines."
At EICMA the Ognibene booth featured the Ducati Panigale V4 of the Lorenzo Mauri M-Motocorsa team that participated in the CIV (SBK) 2019 Championship, and as 'Wild Card' entries at the two Italian WSBK Championship races at Imola and Misano, promising young rider Samuele Cavalieri used Trofeo racing pads and sprockets "with excellent results," says Federico.

OGNIBENE SPA

www.ognibenechaintech.it


Gilles Tooling

Gilles adds new adjustable footrest system

Luxembourg based high-performance parts and accessory designer and manufacturer Gilles Tooling has a whole suite of options available for the popular KTM 790 Duke/R.
Gilles has entered into a new OEM cooperation with KTM and now manufactures the rearsets for the new 2020 model 1290 Super Duke R, officially released at EICMA. KTM is Gilles' fourth OEM customer, it already manufactures for BMW Motorrad, Yamaha and Suzuki. 


Highlights include a completely new adjustment system for footrests, shown for the first time at EICMA on KTM's 790 cc middleweight.


The black/orange accent VCR38GT adjustable rearsets in high-strength 7075 aluminium offer a "perfect combination of low weight and stability with a completely new way to adjust the footpeg position". Easy positioning of the footpeg is enabled by a precise adjustment slider and the adjustment screws are invisible (located below the slider).
Key features are standard and reverse shifting, dual aluminium heel protectors, various adjustment possibilities for footrests, shift travel, foot length, easy positioning of footpeg by precise adjuster, 12 positions to choose for the footpeg, and no play due to a double clearance ball bearing in the gear and brake lever.




The pegs are available in Touring (80 mm long with a special, wider shape) or Sports style, driver and passenger, in black or silver; the replacement footpegs can be quickly and easily mounted on the original mounting points thanks to the included hinged joints. The Touring pegs can be used with or without the included vibration-isolating rubber pads.
Also used here on the 790 Duke are Gilles GT oversize conical tube handlebars (clamping diameter 28.6 mm, 755 mm width, 86 mm height, 94 mm backwards cranked in a 24-degree angle) for a more ergonomic ride than with the stock bars, available in black or gold anodised finish.



The product range is completed by revolutionary 2DGT clamping blocks that are forward and backward adjustable in 4 mm increments (max. 25 mm each direction) and height-adjustable (up and down) in 5 mm increments, lever guards, bar end weights, a race cover kit, axle protectors and trick billet machined rear stand hooks.

GILLES TOOLING GmbH
www.gillestooling.com

Thursday 12 December 2019

Bihr

Bihr buys RST apparel brand MotoDirect

EICMA saw Bartenheim, France based distributor Bihr announce the next stage in its expansion plans with the acquisition of UK based distributor MotoDirect. The jewel in the crown is that Bihr now has ownership of the internationally popular RST apparel brand.
Indeed, the announcement made it clear that the opportunity to further accelerate the growth of the RST brand is a major factor in the strategic thinking that lies behind the deal, as Bihr Distribution seeks to "become the leading integrated distributor of Rider Gear in Europe".


At the EICMA press conference, left to right: Jonny Towers, Christophe Piron, Deb Bullock

Bihr has acquired 100% ownership of MotoDirect, the leading distributor of AGV, Arai and Motul in the UK and owner of the RST and Wolf brands.
As a result of this agreement, the current shareholders of MotoDirect will become shareholders of Bihr, together with Belgium based Alcopa and the management team of the company.
According to Bihr, the "objective of the transaction is first to further develop the RST brand across the globe. Both teams will develop best practices to become the leading and preferred Rider Gear product distributor in Europe. 2021 will see the expansion of the company's motorcycle parts and accessories activity in the UK through MotoDirect's well-established dealer network".
Moto Direct's Deborah Bullock, who will join the Board of Directors of Bihr and act as a Senior Advisor to the management of the company, said: "Over the past three years, Bihr has been successfully distributing and promoting the RST brand in continental Europe. During this period, we had many occasions to exchange ideas and business opportunities. With time, we realised how complementary our teams are and how well they fit together. We are convinced this transaction will help the joint company to accelerate its growth."
"This is a logical step for MotoDirect," said Jonny Towers. "Bihr and MotoDirect have a lot in common - together we are the proud exclusive distributors of Arai helmets and Motul in different geographies. Moreover, Bihr has supported the growth of RST in continental Europe and I am convinced that by joining forces, we will be able to accelerate that growth in Europe and beyond."  


RST founder Jonny Towers product testing at Snetterton Circuit, UK, April 2019

For Bihr, CEO Christophe Piron said: "We are thrilled to partner with MotoDirect. With this transaction, the joint company not only becomes the leading distributor of Rider Gear in Europe but also one of the only integrated Rider Gear players from design creation to distribution, including own production.
"This is an incredible competitive advantage that will help us keep control of the entire value chain, ensuring the quality of the products and smoothness of the delivery."
 In terms of organisation, Jaimy Scevenels, VP Brand & Product Rider Gear at Bihr, will oversee the Rider Gear distribution activities across countries and entities. Terry Birtles, Managing Director at MotoDirect, will remain in charge of the day-to-day UK operations, while RST founder Jonny Towers will focus on developing the RST brand and act as a Senior Advisor to Jaimy Scevenels.
Jaimy Scevenels said: "Bringing both companies together will enable us to achieve the necessary scale to specialise our teams and dedicate a part of this sales force to our Rider Gear activities. The expertise gathered by the MotoDirect team over the last 30 years combined with the Bihr firepower on the continent will help us better promote the brands we are distributing and will help us better serve our clients."
The deal is expected to be closed by January 2020.
www.bihr.eu
www.moto-direct.com

EICMA 2019 Review Pt3



LEM Motor: The Italian quad, minibike and electric vehicles manufacturer stands out as an innovator and design driver in a crowded space. Its popular 500W 48V E-Bike Cruiser line-up offers convincing urban mobility and robust styling options for all the family; www.lem-motor.com



Macna: Owned by Dutch specialist Splash Design, the Macna apparel programme includes high-tech, feature-rich solutions for all styles of riding and all conditions; www.macna.com


 


Moose Racing: Distributed exclusively in Europe by Parts Europe (Wasserliesch/Trier, Germany), Moose Racing's new clothing collection includes Off-Road, MX, Adventure and ATV equipment, and for 2020 features redesigns of its MX lines and its Enduro and ATV developed XCR line. "When it comes to MX clothing, Moose Racing offers three different clothing lines, all adapted to the specialty needs of MX and Off-Road riders and their personal preferences and riding environments. The 'Sahara' line comes with an athletic fit and is made for warm weather using highly ventilated fabric at the right spots. The M1 collection is the allrounder of Moose Racing's MX apparel lines. The durable, multi-talent level design is made to fit all levels of riding skills. The 'Qualifier' range "fits everyone with all that is needed for the first rounds in the dirt - this line is available from children's sizes up to 5XL and promises a comfortable riding experience without a high price tag.” 
Moose Racing also showed the new carbon heat shields and pipe guards it offers for all the latest 2 and 4 stroke off-road motorcycles. The mud covers shown fit over the radiator louvers and help prevent mud build-up on the radiators, avoiding causing over heating of the engine. The Polyurethane LG skid plates provide excellent protection along with the ability to slide over rocks and logs without hanging up. The extended protector covers the shock linkage for added protection; www.partseurope.eu; www.mooseracing.com
 



Venhill Engineering: Following the launch of its 888 Fast-Action throttle for the Yamaha R1, the British motorcycle controls specialist expanded its range of cable and hose kits, developing kits for the current models of off-road bikes and popular ranges of road bikes that are more than three years old. Additions to the range include the latest off-road bikes from KTM, Kawasaki and Yamaha as well as popular sports bikes such as the Kawasaki ZX-6R Ninja 2013-2019 and Yamaha R1 2015-2019. All Venhill kits are designed as a direct replacement for the original equipment and are made in Venhill's ISO 9001 accredited factory in the UK. Every brake line is tested to 1500 psi before leaving the factory and is approved to DOT and TÃœV standards. Cables are made using marine-grade stainless steel inner wire for minimum stretch and a low-friction PTFE liner for a smoother action, without the need for lubrication. www.venhill.co.uk




Technomousse: The Italian mousse specialist has made a lot of changes in a short space of time. An all-new brand identity has been backed up by a complete rebirth of its product line as a result of a massive R&D investment. Featuring the company's Anti Puncture System (APS), EICMA saw it unveil an all-new generation of high performance motorcycle mousses. APS is made with a proprietary latest generation closed-cell expanded material with a low density composition - this allows it to be three times lighter than any similar compound while maintaining all its physical-mechanical properties. "The result is a revolutionary mouldable plastic that is extremely light, ductile, flexible and soft to the touch," says Sales Director Marco Boletti. This single raw material is suitable for all applications - from Enduro to MX to mini-cross - and features in the new 'Black Series' range, with four degrees of softness that ensures optimal pressures, high performance and complete protection in all off-road disciplines. "The high level of elasticity means the mousse adapts to any type of tyre, being able to cover its carcass 100% and is equipped with the exceptional 'Ready to Race' feature that makes it able to reach maximum levels of elasticity after only a few minutes of use, and then resume its hardness and initial conformation during rest at the end of use, and means our products have no expiry date," says Marco;  www.technomousse.com

MotoE

Matteo Ferrari takes inaugural FIM Enel MotoE World Cup

Matteo Ferrari (Trentino Gresini MotoE) has been crowned 2019 FIM Enel MotoE World Cup winner thanks to a P5 finish in Race 2 at the Gran Premio Motul de la Comunitat Valenciana. Brazilian Eric Granado (Avintia Esponsorma Racing) beat Bradley Smith (One Energy Racing) on the final lap to claim a double victory at the Circuit Ricardo Tormo, with Hector Garzo (Tech 3 E-Racing) completing the Race 2 podium after being disqualified from Race 1.



Having achieved a double win at Misano in September, Ferrari entered the Valencia races with a 19-point lead over his nearest rival, Tech 3's Hector Garzo.
The first race at Valencia was won by Granado, with Garzo disqualified for running tyre pressures below the permitted minimum. Granado's Race 2 was enough to give Ferrari a 20-point buffer over MotoGP podium finisher Bradley Smith as he entered the final lap. The champion himself took the chequered flag in fifth, challenging Granado on the opening lap, but ultimately yielding to Garzo and Pramac rider Alex de Angelis.
Former MotoGP star Sete Gibernau, who will depart the MotoE grid after one season, finished his final race in the category in seventh, losing out to fellow ex-premier class rider Mike Di Meglio on the final lap by 0.038s.
While Ferrari and Smith retained the first two spots in the standings, Granado leaped ahead of his teammate and ex-Avintia MotoGP rider Xavier Simeon for third. Simeon crashed on the opening lap of the final race, his accident collecting Pramac's Josh Hook in the process. Ferrari will remain part of the Gresini MotoE line-up next year.


 


2020 FIM Enel MotoE World Cup - Provisional Schedule

The provisional calendar for the 2020 FIM Enel MotoE World Cup will see the series visit more venues for another six rounds in its second year.
The season will begin at the Spanish Grand Prix at the Circuito de Jerez-Angel Nieto before round two sees MotoE head to Le Mans and the French Grand Prix. From there it’s on to a new venue, the TT Circuit Assen, which replaces the Sachsenring on the Cup calendar for 2020.


MotoE will then get back on track at the Red Bull Ring in Austria before the summer break, with a double-header at Misano World Circuit Marco Simoncelli to round out the year as the Gran Premio di San Marino e della Riviera di Rimini hosts the season finale for the 2020 Cup.