Hornig - BMW accessory additions
German BMW parts and accessory specialist Hornig has a range of new products - including custom style leather cuffs for the handlebar grips on the R 18 and an expandable (8 to 16 litres) tail/rear seat bag made from water-resistant material for the S1000R/RR.
Seen here for the R1200GS LC and ADV, R1250GS ADV, and the 2015-2019 S1000XR, these EU homologated, adjustable handlebar risers for the original 32 mm handlebars will raise the bar by up to 30 mm for a more upright and much more relaxed seating position. They can also be adjusted closer or further from the body in 2 mm steps (+/- 14 mm) - further increasing driving comfort.
 |
| Adjustable handlebar risers |
Usually there is no need for longer clutch or brake cables. However, depending on the handlebar riser setting, the hydraulic lines may be too short. Hornig then recommends using its line adapters.
Also seen here, this street legal LED retrofit conversion bulb allows for a quick and straight forward change from the stock halogen original main headlight to modern LED technology on a wide range of BMW model series - H4 and H7 LED replacements both available.
 |
| LED retrofit conversion bulb |
As lighting upgrades go, it couldn't be easier - just change the headlight lamp. Simple. The result is a 230% brighter LED light (compared to the legal minimum standard for halogen lamps) that "delivers breakthrough brightness with daylight effect on every journey".
The optimum light colour of 5800 Kelvin produces a white, high-contrast light that allows traffic signs and obstacles to be recognised earlier. In addition, premature fatigue of the eyes is prevented, which makes night driving more comfortable and safer. The brand-new Philips AirBoost cooling technology dissipates heat from the LED and enables long-lasting performance with a lifespan of up to 3,000 hours. Philips SafeBeam technology ensures optimised light resistance and glare-free driving.
 |
| Horn |
Finally, this 100 decibel 12V single horn for selected R18, S1000R, F800S, F800ST and F800GT models is an easily installed, compact (60 mm x 80 mm), E-marked design that is interchangeable with the original horn as a stock upgrade replacement.
MOTORCYCLE PARTS HORNIG
